Visual Pockets Hanging
(2)When Hanging Pockets Are the Right Container Labelling Solution
Hanging pockets are the right specification when the container surface cannot accept adhesive or magnetic attachment. Textured plastic, oily surfaces, dust-coated bins and frequently washed containers are unsuitable for adhesive. Plastic, fabric and wire-mesh containers cannot hold a magnet. In each case, hanging pockets solve the problem by attaching to the container edge rather than the surface.
Typical container types include plastic stacking crates, kanban bins, wire mesh containers, fabric bins, returnable transit packaging (RTP) and pallet boxes. The hook or clip locks onto the rim or hook point of the container, so the label travels with the container through every cycle of filling, transit, picking, return and refill.
The Orgatex UK Hanging Visual Pockets Range
The Orgatex UK hanging pockets range covers two formats. The standard Hanging Visual Pocket holds a label card behind a clear window for everyday container identification. This is the right choice for indoor storage, kanban supermarkets, kitting cells and any application where the label card is not exposed to dust, moisture or aggressive handling.
The Hanging Visual Pocket With Protective Flap adds a clear protective flap over the front of the label card. The flap shields the card from dust, moisture and accidental damage. Specify the protective-flap version for outdoor yards, wash-down areas, cold stores, dusty environments and any container that is moved frequently or stored in conditions that would degrade an exposed label.
Hanging Pockets vs Adhesive and Magnetic Visual Pockets
The Orgatex UK visual pockets range covers three attachment methods, each suited to different surfaces. Adhesive visual pockets are the right specification for permanent attachment to smooth, clean surfaces such as racking, pallet boxes, fixed equipment and shelving. The adhesive bond is strong but requires a suitable surface for reliable adhesion.
Magnetic visual pockets are the right specification for ferrous metal surfaces where the label needs to be repositioned regularly. The magnetic attachment is reusable but works only on steel and other magnetic materials. Hanging pockets are the right specification when neither attachment method suits the container. The hook or clip attaches to the container itself, which removes any dependency on the surface material, finish or cleanliness.
Hanging Pockets in Kanban and 5S Container Labelling
Hanging pockets are the labelling layer for kanban supermarkets, kitting trolleys and consolidation bins where containers move through cycles. The label card identifies the part number, part description, storage location, supplier reference, kanban quantity and any colour-coded status indicator.
When the container is filled at the supplier, the card stays with the container. When the empty container is returned for refill, the card travels back. This eliminates the time spent re-labelling at every cycle and supports lean material supply routines. In a 5S programme, hanging pockets are part of the 'set in order' layer: every container has its label, and every label tells the operator where the container belongs and what is inside.
What to Print on a Hanging Pocket Label Card
The label card sits behind the clear window of the hanging pocket. Common content includes part number and part description, storage location, supplier or customer reference, kanban quantity, colour-coded status indicator (active, hold, quarantine) and barcode or QR code for scanning. Print label cards in-house with a standard inkjet or laser printer, or use a barcode label printer for scannable cards. The label card is removable and replaceable at any time.
Installing Hanging Pockets
Hanging pockets install instantly. The integrated hook or clip locks onto the container edge, rim or hook point. The label card slides into the window from the open side. No surface preparation, no adhesive curing time and no tools are required. For a full container fleet, label cards can be printed and pre-loaded into hanging pockets so the labelled containers are ready for deployment in a single batch.
When Hanging Pockets Are the Right Container Labelling Solution
Hanging pockets are the right specification when the container surface cannot accept adhesive or magnetic attachment. Textured plastic, oily surfaces, dust-coated bins and frequently washed containers are unsuitable for adhesive. Plastic, fabric and wire-mesh containers cannot hold a magnet. In each case, hanging pockets solve the problem by attaching to the container edge rather than the surface.
Typical container types include plastic stacking crates, kanban bins, wire mesh containers, fabric bins, returnable transit packaging (RTP) and pallet boxes. The hook or clip locks onto the rim or hook point of the container, so the label travels with the container through every cycle of filling, transit, picking, return and refill.
The Orgatex UK Hanging Visual Pockets Range
The Orgatex UK hanging pockets range covers two formats. The standard Hanging Visual Pocket holds a label card behind a clear window for everyday container identification. This is the right choice for indoor storage, kanban supermarkets, kitting cells and any application where the label card is not exposed to dust, moisture or aggressive handling.
The Hanging Visual Pocket With Protective Flap adds a clear protective flap over the front of the label card. The flap shields the card from dust, moisture and accidental damage. Specify the protective-flap version for outdoor yards, wash-down areas, cold stores, dusty environments and any container that is moved frequently or stored in conditions that would degrade an exposed label.
Hanging Pockets vs Adhesive and Magnetic Visual Pockets
The Orgatex UK visual pockets range covers three attachment methods, each suited to different surfaces. Adhesive visual pockets are the right specification for permanent attachment to smooth, clean surfaces such as racking, pallet boxes, fixed equipment and shelving. The adhesive bond is strong but requires a suitable surface for reliable adhesion.
Magnetic visual pockets are the right specification for ferrous metal surfaces where the label needs to be repositioned regularly. The magnetic attachment is reusable but works only on steel and other magnetic materials. Hanging pockets are the right specification when neither attachment method suits the container. The hook or clip attaches to the container itself, which removes any dependency on the surface material, finish or cleanliness.
Hanging Pockets in Kanban and 5S Container Labelling
Hanging pockets are the labelling layer for kanban supermarkets, kitting trolleys and consolidation bins where containers move through cycles. The label card identifies the part number, part description, storage location, supplier reference, kanban quantity and any colour-coded status indicator.
When the container is filled at the supplier, the card stays with the container. When the empty container is returned for refill, the card travels back. This eliminates the time spent re-labelling at every cycle and supports lean material supply routines. In a 5S programme, hanging pockets are part of the 'set in order' layer: every container has its label, and every label tells the operator where the container belongs and what is inside.
What to Print on a Hanging Pocket Label Card
The label card sits behind the clear window of the hanging pocket. Common content includes part number and part description, storage location, supplier or customer reference, kanban quantity, colour-coded status indicator (active, hold, quarantine) and barcode or QR code for scanning. Print label cards in-house with a standard inkjet or laser printer, or use a barcode label printer for scannable cards. The label card is removable and replaceable at any time.
Installing Hanging Pockets
Hanging pockets install instantly. The integrated hook or clip locks onto the container edge, rim or hook point. The label card slides into the window from the open side. No surface preparation, no adhesive curing time and no tools are required. For a full container fleet, label cards can be printed and pre-loaded into hanging pockets so the labelled containers are ready for deployment in a single batch.
-
Hanging Visual Pocket With Protective Flap
Labelling solution for containers. Protective Flap prevents dust and moisture
-
Frequently Asked Questions
What are hanging pockets? +
Hanging pockets are container labelling pockets with an integrated hook or clip that attaches to the edge, rim, hook or wire frame of a container. The label card sits behind a clear window for visibility and protection. They are used for container labelling where adhesive and magnetic attachment methods are not suitable.
When should you choose hanging pockets over adhesive or magnetic visual pockets? +
Choose hanging pockets when the container surface cannot hold adhesive (textured plastic, oily, dusty, frequently washed) or a magnet (plastic, fabric, wire mesh). Choose adhesive visual pockets for permanent attachment to smooth surfaces such as racking. Choose magnetic visual pockets for repositionable attachment to ferrous metal surfaces.
What is the difference between a standard hanging visual pocket and one with a protective flap? +
A standard hanging visual pocket holds a label card behind a clear window. The protective-flap version adds a clear flap over the front of the label card to shield it from dust, moisture and accidental damage. Specify the protective-flap version for outdoor yards, wash-down areas, cold stores and dusty environments.
Which containers do hanging pockets attach to? +
Hanging pockets attach to plastic stacking crates, kanban bins, wire mesh containers, fabric bins, returnable transit packaging (RTP), pallet boxes and any other container with a hangable edge or hook point. The hook or clip locks onto the container rim or frame.
What information is typically printed on the label card inside a hanging pocket? +
Label cards typically include part number, part description, storage location, supplier reference, kanban quantity, a colour-coded status indicator and a barcode or QR code. The card sits behind the clear window of the hanging pocket and can be removed and replaced at any time.
How are hanging pockets used in Kanban and 5S systems? +
In kanban systems, hanging pockets identify each container through the supply cycle - filling at the supplier, transit, picking and return for refill. The card travels with the container, so re-labelling is not required. In 5S programmes, hanging pockets are part of the 'set in order' layer, identifying where each container belongs and what is inside it.
